VIP工艺预成型体的压缩响应(英文)

The final thickness of a product after the vacuum infusion process （VIP）, which is equal to the fiber volume fraction, depends in part on the compression responses of the preform because one of the mold faces is flexible in VIE This study aims at investigating the compression responses of different fabrics under dry or wet conditions. The main factors affecting the compression response under investigation include, the vacuum pressure, the loading and unloading repeatability on the preform, the layup design, the kinds of fabrics, and the resin viscosity. Besides, the effects of some internal factors such as nesting and elastic recovery of fibers, lubrication of resin, friction between fibers, and so on, are also studied. In the end, this article expatiates the meaning of the matching requirements of the permeability of the preform and that of the distribution medium.     

攻击地面固定目标寻的导弹的一体化制导与控制(英文)

This paper presents a scheme of integrated guidance and autopilot design for homing missiles against ground fixed targets. An integrated guidance and control model in the pitch plane is formulated and further changed into a normal form by nonlinear coordinate transformation. By adopting the sliding mode control approach, an adaptive nonlinear control law of the system is designed so that the missile can hit the target accurately with a desired impact attitude angle. The stability analysis of the closed-loop system is also conducted. The numerical simulation has confirmed the usefulness of the proposed design scheme.     

浅谈住户在装修时的墙体拆除

浅谈住户在装修时什么样的墙体可以拆除，什么样的墙体不可以拆除，及住户需拆除墙体时应办理的手续。     

对乒乓球"落点"的初步应用分析

通过问卷调查,访谈法、训练设计法,分析探讨乒乓球五要素中"落点"的开发、研究,旨在使大家对"落点"有更明确的了解.     

基于积分域匹配滤波的系统误差检测

目标跟踪中,如果用于数据融合的位置或速度测元中存在系统误差,可采用最小二乘意义上的微分平滑进行滤波及系统误差诊断。由于微分平滑精度较低,由此提出积分域匹配滤波,同时用这种方法检测系统误差。数学推导证明了积分域检测系统误差的精度高于微分平滑,仿真结果亦证实了此结论。     

复合材料机翼盒段的设计、模态分析和试验

为了进行机翼盒段结构的模态分析和试验,依据结构相似方法对盒段进行缩比,采用复合材料整体成型技术制造盒段模型,该模型同时实现了结构动力学相似与传力相似.对模型进行了模态分析和试验,两者结果吻合较好.本模型为在低速风洞中实现高速飞机机翼颤振试验奠定了基础.      

补燃发动机涡轮泵联试强迫起动程序设计

以采用强迫起动方式的补燃发动机涡轮泵联试系统为研究对象,建立了系统的动态模型.对联试装置进行了综合冷调试验并对联试的起动过程进行了数值模拟.结合综合冷调试验结果和数值仿真结果,制定了系统的起动程序.试车结果表明联试系统起动过程平稳.对计算结果和试验结果进行了对比,二者吻合的较好.     

Experimental study of partially-cured Z-pins reinforced foam core composites：K-Cor sandwich structures

This paper presents an experimental study of a novel K-Cor sandwich structure rein- forced with partially-cured Z-pins. The influence of pultrusion processing parameters on Z-pins characteristics was studied and the effect of Z-pins on mechanical properties was disclosed. Differential scanning calorimetry （DSC） and optical microscopy （OM） methods were employed to determine the curing degree of as-prepared Z-pins and observe the implanted Z-pins in the K-Cor structure. These partially-cured Z-pins were treated with a stronger bonding link between face sheets and the foam core by means of a hot-press process, thereby decreasing burrs and cracking defects when the Z-pins were implanted into the Rohacell foam core. The results of the out-of-plane tensile tests and the climbing drum peel （CDP） tests showed that K-Cor structures exhibited superior mechanical performance as compared to X-Cor and blank foam core. The observed results of failure modes revealed that an effective bonding link between the foam core and face sheets that was provided from partially-cured Z-pins contributed to the enhanced mechan- ical performances of K-Cor sandwich structures.     

Bluetooth无线接入技术及其应用

本文首先讨论了蓝牙 (Bluetooth)技术的基本概念 ,然后分析了蓝牙无线接入控制技术的特点 ,并对蓝牙无线接入技术存在的问题及发展方向提出了自己的见解     

Comments on "Unbiased converted measurements for tracking"

We show that there exists a compatibility problem in the derivation of the mean and covariance of the converted measurement errors in L. Mo et al. (ibid., vol.34, no.3, p.1023-7, 1998), and then present a modification to the computation of them, in which both the mean and the covariance are computed strictly conditioned on the measurements.